Refer to the exhibit. A network engineer is in the process of establishing IP connectivity between two sites.
Routers R1 and R2 are partially configured with IP addressing. Both routers have the ability to access devices on their respective LANs. Which command set configures the IP connectivity between devices located on both LANs in each site?

A. R1
ip route 192.168.1.1 255.255.255.0 GigabitEthernet0/1
R2
ip route 10.1.1.1 255.255.255.0 GigabitEthernet0/1
B. R1
ip route 192.168.1.0 255.255.255.0 GigabitEthernet0/0
R2
ip route 10.1.1.1 255.255.255.0 GigabitEthernet0/0
C. R1
ip route 0.0.0.0 0.0.0.0 209.165.200.225
R2
ip route 0.0.0.0 0.0.0.0 209.165.200.226
D. R1
ip route 0.0.0.0 0.0.0.0 209.165.200.226
R2
ip route 0.0.0.0 0.0.0.0 209.165.200.225