Tag: Cisco Certified Network Associate (200-301 CCNA)

Cisco Certified Network Associate (200-301 CCNA) – Question560

An engineer is configuring switch SW1 to act as an NTP server when all upstream NTP server connectivity fails. Which configuration must be used?

A. SW1# config t
SW1(config)#ntp peer 192.168.1.1
SW1(config)#ntp access-group peer accesslist1
B. SW1# config t
SW1(config)#ntp master
SW1(config)#ntp server192.168.1.1
C. SW1# config t
SW1(config)#ntp backup
SW1(config)#ntp server192.168.1.1
D. SW1# config t
SW1(config)#ntp server192.168.1.1
SW1(config)#ntp access-group peer accesslist1

Correct Answer: B

Explanation:

Explanation:
ntp server192.168.1.1 makes the SW1 a client to the primary server reachable with an IP address of 192.168.1.1 NTP server makes SW1 a server and uses its own internal clock to provide the time when the connectivity to the primary server 192.168.1.1 fails.

Cisco Certified Network Associate (200-301 CCNA) – Question559

Which condition must be met before an NMS handles an SNMP trap from an agent?

A. The NMS must receive the same trap from two different SNMP agents to verify that it is reliable.
B. The NMS must receive a trap and an inform message from the SNMP agent within a configured interval.
C. The NMS software must be loaded with the MIB associated with the trap.
D. The NMS must be configured on the same router as the SNMP agent.

Correct Answer: C

Cisco Certified Network Associate (200-301 CCNA) – Question557


Refer to the exhibit. The ntp server 192.168.0.3 command has been configured on router 1 to make it an NTP client of router 2. Which command must be configured on router 2 so that it operates in server-only mode and relies only on its internal clock?

A. Router2(config)#ntp server 172.17.0.1
B. Router2(config)#ntp server 192.168.0.2
C. Router2(config)#ntp passive
D. Router2(config)#ntp master 4

Correct Answer: D

Cisco Certified Network Associate (200-301 CCNA) – Question555

An engineer is installing a new wireless printer with a static IP address on the Wi-Fi network. Which feature must be enabled and configured to prevent connection issues with the printer?

A. client exclusion
B. DHCP address assignment
C. passive client
D. static IP tunneling

Correct Answer: C

Explanation:

Explanation:
Passive clients are wireless devices, such as scales and printers that are configured with a static IP address.
These clients do not transmit any IP information such as IP address, subnet mask, and gateway information when they associate with an access point. As a result, when passive clients are used, the controller never knows the IP address unless they use the DHCP.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/confi…

Cisco Certified Network Associate (200-301 CCNA) – Question552

DRAG DROP

Refer to the exhibit. An engineer is configuring the router to provide static NAT for the webserver. Drag and drop the configuration commands from the left onto the letters that correspond to its position in the configuration on the fight.
Select and Place:

Correct Answer: [img 0552-0002.jpg]