Which two cable types must be used to connect an access point to the WLC when 2.5-Gbps and 5-Gbps upload speeds are required? (Choose two.)

A. 10GBASE-T
B. 1000BASE-LX/LH
C. Cat 5e
D. Cat 5
E. Cat 3

What is the function of the control plane?

A. It exchanges routing table information.
B. It provides CLI access to the network device.
C. It looks up an egress interface in the forwarding information base.
D. It forwards traffic to the next hop.

Which action is taken by the data plane within a network device?

A. Constructs a routing table based on a routing protocol.
B. Forwards traffic to the next hop.
C. Looks up an egress interface in the forwarding information base.
D. Provides CLI access to the network device.

What is a function spine-and-leaf architecture?

A. Offers predictable latency of the traffic path between end devices.
B. Exclusively sends multicast traffic between servers that are directly connected to the spine.
C. Mitigates oversubscription by adding a layer of leaf switches.
D. Limits payload size of traffic within the leaf layer.

Which action is taken by a switch port enabled for PoE power classification override?

A. As power usage on a PoE switch port is checked data flow to the connected device is temporarily paused
B. When a powered device begins drawing power from a PoE switch port, a syslog message is generated
C. If a switch determines that a device is using less than the minimum configured power, it assumes the device has failed and disconnects it
D. Should a monitored port exceed the maximum administrative value for power, the port is shut down and err- disabled

Refer to the exhibit. An IP subnet must be configured on each router that provides enough addresses for the number of assigned hosts and anticipates no more than 10% growth for new hosts. Which configuration script must be used?

A.

B.

C.

D.

DRAG DROP
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Select and Place:

DRAG DROP
Drag and drop the DNS lookup components from the left onto the functions on the right.
Select and Place:

DRAG DROP
Refer to the exhibit.

An engineer is tasked with verifying network configuration parameters on a client workstation to report back to the team lead. Drag and drop the node identifiers from the left onto the network parameters on the right.
Select and Place:

What is the role of a firewall in an enterprise network?

A. determines which packets are allowed to cross from unsecured to secured networks
B. processes unauthorized packets and allows passage to less secure segments of the network
C. forwards packets based on stateless packet inspection
D. explicitly denies all packets from entering an administrative domain