Explanation: The Phase 4 of DITSCAP C&A is known as Post Accreditation. This phase starts after the system has been accredited in the Phase 3. The goal of this phase is to continue to operate and manage the system and to ensure that it will maintain an acceptable level of residual risk. The process activities of this phase are as follows: System operations Security operations Maintenance of the SSAA Change management Compliance validation Answer: F is incorrect. It is a Phase 3 activity.

Explanation: A security policy is an overall general statement produced by senior management (or a selected policy board or committee) that dictates what role security plays within the organization. A well designed policy addresses the following: What is being secured? – Typically an asset. Who is expected to comply with the policy? – Typically employees. Where is the vulnerability, threat, or risk? – Typically an issue of integrity or responsibility.

Explanation: The concept of availability ensures reliable and timely access to data or resources. In other words, availability ensures that the systems are up and running when needed. The availability concept also ensures that the security services are in working order. Answer: A and D are incorrect. The concept of integrity ensures that modifications are not made to data by unauthorized personnel or processes. It also ensures that unauthorized modifications are not made to data by authorized personnel or processes. Answer: B is incorrect. Accountability determines the actions and behaviors of an individual within a system, and identifies that particular individual. Audit trails and logs support accountability.

Explanation: Snort is a signature-based intrusion detection system. Snort is an open source network intrusion prevention and detection system that operates as a network sniffer. It logs activities of the network that is matched with the predefined signatures. Signatures can be designed for a wide range of traffic, including Internet Protocol (IP), Transmission Control Protocol (TCP), User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP). The three main modes in which Snort can be configured are as follows: Sniffer mode: It reads the packets of the network and displays them in a continuous stream on the console. Packet logger mode: It logs the packets to the disk. Network intrusion detection mode: It is the most complex and configurable configuration, allowing Snort to analyze network traffic for matches against a user-defined rule set. Answer: B is incorrect. StealthWatch is a behavior-based intrusion detection system. Answer: A is incorrect. RealSecure is a network-based IDS that monitors TCP, UDP and ICMP traffic and is configured to look for attack patterns. Answer: C is incorrect. Tripwire is a file integrity checker for UNIX/Linux that can be used for host-based intrusion detection.

Explanation: The areas of information system, as separated by Information Assurance Framework, are as follows: Local Computing Environments: This area includes servers, client workstations, operating system, and applications. Enclave Boundaries: This area consists of collection of local computing devices, regardless of physical location, that are interconnected via local area networks (LANs) and governed by a single security policy. Networks and Infrastructures: This area provides the network connectivity between enclaves. It includes operational area networks (OANs), metropolitan area networks (MANs), and campus area networks (CANs). Supporting Infrastructures: This area provides security services for networks, client workstations, Web servers, operating systems, applications, files, and single-use infrastructure machines

Explanation: Configuration control is a procedure of the Configuration management. Configuration control is a set of processes and approval stages required to change a configuration item’s attributes and to re-baseline them. It supports the change of the functional and physical attributes of software at various points in time, and performs systematic control of changes to the identified attributes. Answer: C is incorrect. Configuration audits confirm that the configuration identification for a configured item is accurate, complete, and will meet specified program needs. Configuration audits are broken into functional and physical configuration audits. They occur either at delivery or at the moment of effecting the change. A functional configuration audit ensures that functional and performance attributes of a configuration item are achieved, while a physical configuration audit ensures that a configuration item is installed in accordance with the requirements of its detailed design documentation. Answer: D is incorrect. Configuration identification is the process of identifying the attributes that define every aspect of a configuration item. A configuration item is a product (hardware and/or software) that has an end-user purpose. These attributes are recorded in configuration documentation and baselined. Baselining an attribute forces formal configuration change control processes to be effected in the event that these attributes are changed. Answer: A is incorrect. The configuration status accounting procedure is the ability to record and report on the configuration baselines associated with each configuration item at any moment of time. It supports the functional and physical attributes of software at various points in time, and performs systematic control of accounting to the identified attributes for the purpose of maintaining software integrity and traceability throughout the software development life cycle.

Explanation: In order to accomplish the task, you should limit the number of Syslog messages or TCP connections from a specific source for a certain time period. This will prevent a denial of service (DoS) for the Syslog server and the loss of Syslog messages from other sources. Answer: D is incorrect. You can encrypt rotated log files automatically using third-party or OS mechanisms to protect data confidentiality. Answer: A is incorrect. You can use a different message format other than Syslog in order to accept data for aggregating data from hosts that do not support Syslog. Answer: B is incorrect. You can enable the storage of log entries in both traditional Syslog files and a database for creating a database storage for logs.

Explanation: Only acceptance is appropriate for both positive and negative risk events. Often sharing is used for low probability and low impact risk events regardless of the positive or negative effects the risk event may bring the project. Acceptance response is a part of Risk Response planning process. Acceptance response delineates that the project plan will not be changed to deal with the risk. Management may develop a contingency plan if the risk does occur. Acceptance response to a risk event is a strategy that can be used for risks that pose either threats or opportunities. Acceptance response can be of two types: Passive acceptance: It is a strategy in which no plans are made to try or avoid or mitigate the risk. Active acceptance: Such responses include developing contingency reserves to deal with risks, in case they occur. Acceptance is the only response for both threats and opportunities. Answer: C is incorrect. Sharing is a positive risk response that shares an opportunity for all parties involved in the risk event. Answer: B is incorrect. Transference is a negative risk event that transfers the risk ownership to a third party, such as vendor, through a contractual relationship. Answer: D is incorrect. Mitigation is a negative risk event that seeks to lower the probability and/or impact of a risk event.

Explanation: The credit card issuing company has violated the Privacy law. According to the Internet Privacy law, a company cannot provide their customer’s financial and personal details to other companies. Answer: A is incorrect. Trademark laws facilitate the protection of trademarks around the world. Answer: B is incorrect. There is no law such as Security law. Answer: D is incorrect. The Copyright law protects original works or creations of authorship including literary, dramatic, musical, artistic, and certain other intellectual works.

Explanation: Procedural controls include incident response processes, management oversight, security awareness, and training. Answer: B is incorrect. Physical controls include fences, doors, locks, and fire extinguishers. Answer: D is incorrect. Technical controls include user authentication (login) and logical access controls, antivirus software, and firewalls. Answer: A is incorrect. The legal and regulatory, or compliance controls, include privacy laws, policies, and clauses.