Explanation: A business impact analysis (BIA) is a crisis management and business impact analysis technique that identifies those threats that can impact the business continuity of operations. Such threats can be either natural or man-made. The BIA team should have a clear understanding of the organization, key business processes, and IT resources for assessing the risks associated with continuity. In the BIA team, there should be senior management, IT personnel, and end users to identify all resources that are to be used during normal operations. Answer: B is incorrect. Risk analysis is the science of risks and their probability and evaluation in a business or a process. It is an important factor in security enhancement and prevention in a system. Risk analysis should be performed as part of the risk management process for each project. The outcome of the risk analysis would be the creation or review of the risk register to identify and quantify risk elements to the project and their potential impact. Answer: A is incorrect. The functional analysis process is used for converting system requirements into a comprehensive function standard. Verification is the result of the functional analysis process, in which the fundamentals of a system level functional architecture are defined adequately to allow for synthesis in the design phase. The functional analysis breaks down the higher-level functions into the lower level functions. Answer: D is incorrect. Requirements analysis encompasses the tasks that go into determining the needs or conditions to meet for a new or altered product, taking account of the possibly conflicting requirements of the various stakeholders.

Explanation: Maria is new for this organization and she does not have any idea regarding the present infrastructure. Therefore, black box testing is best suited for her. Blackbox testing is a technique in which the testing team has no knowledge about the infrastructure of the organization. The testers must first determine the location and extent of the systems before commencing their analysis. This testing technique is costly and time consuming. Answer: B is incorrect. White box testing, also known as Clear box or Glass box testing, takes into account the internal mechanism of a system or application. The connotations of “Clear box” and “Glass box” indicate that a tester has full visibility of the internal workings of the system. It uses knowledge of the internal structure of an application. It is applicable at the unit, integration, and system levels of the software testing process. It consists of the following testing methods: Control flow-based testing Create a graph from source code. Describe the flow of control through the control flow graph. Design test cases to cover certain elements of the graph. Data flow-based testing Test connections between variable definitions. Check variation of the control flow graph. Set DEF (n) contains variables that are defined at node n. Set USE (n) are variables that are read. Answer: A is incorrect. Graybox testing is a combination of whitebox testing and blackbox testing. In graybox testing, the test engineer is equipped with the knowledge of system and designs test cases or test data based on system knowledge. The security tester typically performs graybox testing to find vulnerabilities in software and network system. Answer: D is incorrect. Unit testing is a type of testing in which each independent unit of an application is tested separately. During unit testing, a developer takes the smallest unit of an application, isolates it from the rest of the application code, and tests it to determine whether it works as expected. Unit testing is performed before integrating these independent units into modules. The most common approach to unit testing requires drivers and stubs to be written. Drivers and stubs are programs. A driver simulates a calling unit, and a stub simulates a called unit.

Explanation: Biometrics is a method of authentication that uses physical characteristics, such as fingerprints, scars, retinal patterns, and other forms of biophysical qualities to identify a user. Nowadays, the usage of biometric devices such as hand scanners and retinal scanners is becoming more common in the business environment. It is the most secure method of authentication. Answer: B is incorrect. Username and password is the least secure method of authentication in comparison of smart card and biometrics authentication. Username and password can be intercepted. Answer: D is incorrect. Smart card authentication is not as reliable as biometrics authentication. Answer: C is incorrect. Anonymous authentication does not provide security as a user can log on to the system anonymously and he is not prompted for credentials.

Explanation: A simulation test is a method used to test the disaster recovery plans. It operates just like a structured walk-through test. In the simulation test, the members of a disaster recovery team present with a disaster scenario and then, discuss on appropriate responses. These suggested responses are measured and some of them are taken by the team. The range of the simulation test should be defined carefully for avoiding excessive disruption of normal business activities. Answer: A is incorrect. The structured walk-through test is also known as the table-top exercise. In structured walk-through test, the team members walkthrough the plan to identify and correct weaknesses and how they will respond to the emergency scenarios by stepping in the course of the plan. It is the most effective and competent way to identify the areas of overlap in the plan before conducting more challenging training exercises. Answer: B is incorrect. A full-interruption test includes the operations that shut down at the primary site and are shifted to the recovery site according to the disaster recovery plan. It operates just like a parallel test. The full-interruption test is very expensive and difficult to arrange. Sometimes, it causes a major disruption of operations if the test fails. Answer: C is incorrect. A parallel test includes the next level in the testing procedure, and relocates the employees to an alternate recovery site and implements site activation procedures. These employees present with their disaster recovery responsibilities as they would for an actual disaster. The disaster recovery sites have full responsibilities to conduct the day-to-day organization’s business.

Explanation: This is an example of transference. When the risk is transferred to a third party, usually for a fee, it creates a contractual-relationship for the third party to manage the risk on behalf of the performing organization. Risk response planning is a method of developing options to decrease the amount of threats and make the most of opportunities. The risk response should be aligned with the consequence of the risk and cost-effectiveness. This planning documents the processes for managing risk events. It addresses the owners and their responsibilities, risk identification, results from qualification and quantification processes, budgets and times for responses, and contingency plans. The various risk response planning techniques are as follows: Risk acceptance: It indicates that the project team has decided not to change the project management plan to deal with a risk, or is unable to identify any other suitable response strategy. Risk avoidance: It is a technique for a threat, which creates changes to the project management plan that are meant to either eliminate the risk or to protect the project objectives from this impact. Risk mitigation: It is a list of specific actions being taken to deal with specific risks associated with the threats and seeks to reduce the probability of occurrence or impact of risk below an acceptable threshold. Risk transference: It is used to shift the impact of a threat to a third party, together with the ownership of the response.

Explanation: In order to accomplish the task, you should use the software testing technique. By using this technique you can determine compatibility of systems with custom applications or you can identify other unforeseen interactions. You can also use the software testing technique while you are upgrading software. Answer: B is incorrect. You can use the antivirus management to save the systems from viruses, unexpected software interactions, and the subversion of security controls. Answer: A is incorrect. You can use the safe software storage technique to ensure that the software and backup copies have not been modified without authorization. Answer: C is incorrect. You can use the backup control to perform back up of software and data.

Explanation: Snort is an open source network intrusion prevention and detection system that operates as a network sniffer. It logs activities of the network that is matched with the predefined signatures. Signatures can be designed for a wide range of traffic, including Internet Protocol (IP), Transmission Control Protocol (TCP), User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP). The three main modes in which Snort can be configured are as follows:
Sniffer mode: It reads the packets of the network and displays them in a continuous stream on the console. Packet logger mode: It logs the packets to the disk. Network intrusion detection mode: It is the most complex and configurable configuration, allowing Snort to analyze network traffic for matches against a user-defined rule set. Answer: B is incorrect. Macof is a tool of the dsniff tool set and used to flood the local network with random MAC addresses. It causes some switches to fail open in repeating mode, and facilitates sniffing. Answer: C is incorrect. Sourcefire is the company that owns and maintains Snort. Answer: A is incorrect. NETSH is not a network intrusion detection system. NETSH is a command line tool to configure TCP/IP settings such as the IP address, Subnet Mask, Default Gateway, DNS, WINS addresses, etc.

Explanation: The Department of Defense Information Assurance Certification and Accreditation Process (DIACAP) is a process defined by the United States Department of Defense (DoD) for managing risk. The subordinate tasks of the Implement and Validate Assigned IA Control phase in the DIACAP process are as follows: Execute and update IA implementation plan. Conduct validation activities. Combine validation results in the DIACAP scorecard. Answer: D is incorrect. The activities related to the disposition of the system data and objects are conducted in the fifth phase of the DIACAP process. The fifth phase of the DIACAP process is known as Decommission System.

Explanation: The Annualized Rate of Occurrence (ARO) is a number that represents the estimated frequency at which a threat is expected to occur. It is calculated based upon the probability of the event occurring and the number of employees that could make that event occur. Answer: D is incorrect. The Exposure Factor (EF) represents the % of assets loss caused by a threat. The EF is required to calculate the Single Loss Expectancy (SLE). Answer: A is incorrect. The Single Loss Expectancy (SLE) is the value in dollars that is assigned to a single event. SLE = Asset Value ($) X Exposure Factor (EF) Answer: C is incorrect. Safeguard acts as a countermeasure for reducing the risk associated with a specific threat or a group of threats.

Explanation: An informative policy informs employees about certain topics. It is not an enforceable policy, but rather one to teach individuals about specific issues relevant to the company. The informative policy can explain how the company interacts with partners, the company’s goals and mission, and a general reporting structure in different situations. Answer: D is incorrect. A regulatory policy ensures that an organization follows the standards set by specific industry regulations. This type of policy is very detailed and specific to a type of industry. The regulatory policy is used in financial institutions, health care facilities, public utilities, and other government-regulated industries, e.g., TRAI. Answer: B is incorrect. An advisory policy strongly advises employees regarding which types of behaviors and activities should and should not take place within the organization. It also outlines possible ramifications if employees do not comply with the established behaviors and activities. The advisory policy can be used to describe how to handle medical information, handle financial transactions, and process confidential information. Answer: C is incorrect. It is not a valid type of policy.