Asynchronous Communication transfers data by sending:
A. bits of data sequentially
B. bits of data sequentially in irregular timing patterns
C. bits of data in sync with a heartbeat or clock
D. bits of data simultaneously
A. bits of data sequentially
B. bits of data sequentially in irregular timing patterns
C. bits of data in sync with a heartbeat or clock
D. bits of data simultaneously
Correct Answer: B
Explanation:
Asynchronous Communication transfers data by sending bits of data in irregular timing patterns.
In asynchronous transmission each character is transmitted separately, that is one character at a time. The character is preceded by a start bit, which tells the receiving end where the character coding begins, and is followed by a stop bit, which tells the receiver where the character coding ends. There will be intervals of ideal time on the channel shown as gaps. Thus there can be gaps between two adjacent characters in the asynchronous communication scheme. In this scheme, the bits within the character frame (including start, parity and stop bits) are sent at the baud rate.
The START BIT and STOP BIT including gaps allow the receiving and sending computers to synchronise the data transmission. Asynchronous communication is used when slow speed peripherals communicate with the computer. The main disadvantage of asynchronous communication is slow speed transmission. Asynchronous communication however, does not require the complex and costly hardware equipments as is required for synchronous transmission.
Asynchronous communication is transmission of data without the use of an external clock signal. Any timing required to recover data from the communication symbols is encoded within the symbols. The most significant aspect of asynchronous communications is variable bit rate, or that the transmitter and receiver clock generators do not have to be exactly synchronized.
The asynchronous communication technique is a physical layer transmission technique which is most widely used for personal computers providing connectivity to printers, modems, fax machines, etc.
An asynchronous link communicates data as a series of characters of fixed size and format. Each character is preceded by a start bit and followed by 1-2 stop bits.
Parity is often added to provide some limited protection against errors occurring on the link.
The use of independent transmit and receive clocks constrains transmission to relatively short characters (<8 bits) and moderate data rates (< 64 kbps, but typically lower). The asynchronous transmitter delimits each character by a start sequence and a stop sequence. The start bit (0), data (usually 8 bits plus parity) and stop bit(s) (1) are transmitted using a shift register clocked at the nominal data rate. When asynchronous transmission is used to support packet data links (e.g. IP), then special characters have to be used ("framing") to indicate the start and end of each frame transmitted. One character (none as an escape character) is reserved to mark any occurrence of the special characters within the frame. In this way the receiver is able to identify which characters are part of the frame and which are part of the "framing". Packet communication over asynchronous links is used by some users to get access to a network using a modem. Most Wide Area Networks use synchronous links and a more sophisticated link protocol Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 100. and http://en.wikipedia.org/wiki/Asynchronous_communication and http://www.erg.abdn.ac.uk/users/gorry/course/phy-pages/async.html and http://www.ligaturesoft.com/data_communications/async-data-transmis…
In asynchronous transmission each character is transmitted separately, that is one character at a time. The character is preceded by a start bit, which tells the receiving end where the character coding begins, and is followed by a stop bit, which tells the receiver where the character coding ends. There will be intervals of ideal time on the channel shown as gaps. Thus there can be gaps between two adjacent characters in the asynchronous communication scheme. In this scheme, the bits within the character frame (including start, parity and stop bits) are sent at the baud rate.
The START BIT and STOP BIT including gaps allow the receiving and sending computers to synchronise the data transmission. Asynchronous communication is used when slow speed peripherals communicate with the computer. The main disadvantage of asynchronous communication is slow speed transmission. Asynchronous communication however, does not require the complex and costly hardware equipments as is required for synchronous transmission.
Asynchronous communication is transmission of data without the use of an external clock signal. Any timing required to recover data from the communication symbols is encoded within the symbols. The most significant aspect of asynchronous communications is variable bit rate, or that the transmitter and receiver clock generators do not have to be exactly synchronized.
The asynchronous communication technique is a physical layer transmission technique which is most widely used for personal computers providing connectivity to printers, modems, fax machines, etc.
An asynchronous link communicates data as a series of characters of fixed size and format. Each character is preceded by a start bit and followed by 1-2 stop bits.
Parity is often added to provide some limited protection against errors occurring on the link.
The use of independent transmit and receive clocks constrains transmission to relatively short characters (<8 bits) and moderate data rates (< 64 kbps, but typically lower). The asynchronous transmitter delimits each character by a start sequence and a stop sequence. The start bit (0), data (usually 8 bits plus parity) and stop bit(s) (1) are transmitted using a shift register clocked at the nominal data rate. When asynchronous transmission is used to support packet data links (e.g. IP), then special characters have to be used ("framing") to indicate the start and end of each frame transmitted. One character (none as an escape character) is reserved to mark any occurrence of the special characters within the frame. In this way the receiver is able to identify which characters are part of the frame and which are part of the "framing". Packet communication over asynchronous links is used by some users to get access to a network using a modem. Most Wide Area Networks use synchronous links and a more sophisticated link protocol Source: KRUTZ, Ronald L. & VINES, Russel D., The CISSP Prep Guide: Mastering the Ten Domains of Computer Security, 2001, John Wiley & Sons, Page 100. and http://en.wikipedia.org/wiki/Asynchronous_communication and http://www.erg.abdn.ac.uk/users/gorry/course/phy-pages/async.html and http://www.ligaturesoft.com/data_communications/async-data-transmis…