Your on-premises network has an IP address range of 11.11.0.0/16. Only IPs within this network range can be used for inter-server communication. The IP address range 11.11.253.0/24 has been allocated for the cloud.
You need to design a VPC in AWS. The servers within the VPC should be able to communicate with hosts both on the Internet and on-premises through a VPN connection.
What combination of configuration steps meets your needs? (Choose two)
A. Set up the VPC with an IP address range of 11.11.253.0/24.
B. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set up a NAT gateway to do translation between 10.10.10.0/24 and 11.11.253.0/24 for all outbound traffic.
C. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for all traffic, and configure the on-premises router to forward traffic to the Internet.
D. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for traffic destined to 11.11.0.0/24, and add a VPC subnet route to point the default gateway to an Internet gateway for Internet traffic.
E. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set the VGW to do a source IP translation of all outbound packets to 11.11.0.0/16.
You need to design a VPC in AWS. The servers within the VPC should be able to communicate with hosts both on the Internet and on-premises through a VPN connection.
What combination of configuration steps meets your needs? (Choose two)
A. Set up the VPC with an IP address range of 11.11.253.0/24.
B. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set up a NAT gateway to do translation between 10.10.10.0/24 and 11.11.253.0/24 for all outbound traffic.
C. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for all traffic, and configure the on-premises router to forward traffic to the Internet.
D. Set up a VPN connection between a VGW and an on-premises router, set the VGW as the default gateway for traffic destined to 11.11.0.0/24, and add a VPC subnet route to point the default gateway to an Internet gateway for Internet traffic.
E. Set up the VPC with an RFC 1918 private IP address range (e.g., 10.10.10.0/24), and set the VGW to do a source IP translation of all outbound packets to 11.11.0.0/16.