Explanation: When the user creates a new EBS volume and is trying to access it for the first time it will encounter reduced IOPS due to wiping or initiating of the block storage. To avoid this as well as achieve the best performance it is required to pre warm the EBS volume. For a blank volume attached with a Linux OS, the “dd” command is used to write to all the blocks on the device. In the command “dd if=/dev/zero of=/dev/ xvdfbs=1M” the parameter “if =import file” should be set to one of the Linux virtual devices, such as /dev/ zero. The “of=output file” parameter should be set to the drive that the user wishes to warm. The “bs” parameter sets the block size of the write operation; for optimal performance, this should be set to 1 MB.